Blog

Some Roofing Mistakes to Avoid for Safety and Sustainability

Installing a new roof could prove to be a costly exercise hence, right from the beginning, you must make sure that the roofs are installed with perfection and that there are no flaws whatsoever. However, often roofing projects could be marked by amateur or shoddy workmanship leading to much higher expenses eventually. 

Your home’s roof is supposed to be a solid defense mechanism against the inclement weather conditions and natural calamities. If your roof has certain issues, they need immediate attention and must be rectified. All issues must be attended to at once before things get out of hand. Several roofing problems are triggered by certain roofing mistakes hence, you must thoroughly examine your roof and verify if it has been correctly installed and repaired properly. Let us discuss some common roofing mistakes that need to be rectified.

As per https://www.huffpost.com, nothing seems worse than a leaky roof overhead that causes unbelievable damage to some parts of your home. Hence, such issues must be rectified at once. However, do some research and seek recommendations before choosing a competent roofing expert. 

Mistake: Bad Nailing Job

One crucial aspect of a standard roofing task is to efficiently manage the nails. You need to do a couple of important things with perfection. The nails must be carefully driven into precisely the nailing strip and that is exactly where the nails should be placed strategically. This seems quite simple but often roofers make the mistake as they are not experienced or competent. Moreover, the nails must be driven to the right depth. The nails must be driven deep into the shingle to keep it secured and maintain safety. Always choose a reputed and experienced roofing company such as Klaus Roofing in Colorado Springs for flawless installation of your roof.

Mistake: Starter Shingles Incorrectly Installed

This is quite a common mistake often made by do-it-yourselfers even before they start. It is of utmost importance to perfectly lay down with care a starter segment of shingles all along the eaves or else, water would be invading the sheathing beneath the cutouts of the shingles at the bottom.

Mistake: Improper Installation of Valley Flashing

Some roofers seem to be inexperienced and novice. They often install improperly the valley flashing. We know that flashing must be layered strategically below the shingles but they often place it atop the shingles by mistake or due to lack of experience or expertise. The metal’s U-shape must be facing the valley. Otherwise, you know that the water would be compelled to run precisely where it shouldn’t be. This should be speeding up flashing or shingle deterioration. 

Mistake: Not Keeping Any Vents for Attics or Ceilings

While laying down carefully all the shingles, it is of critical importance to ensure that the air must escape from ceilings and attics. If no vents are allowed in ceilings and attics, moisture could be getting accumulated over time and, this in turn, would be weakening shingles prematurely.

Conclusion

You must examine meticulously if the roof installation has been done properly without any mistakes. Apart from avoiding some of the most common and frequently made mistakes discussed above, you need to also, make sure that your roofer doesn’t make the mistake of aligning shingles incorrectly. 

Show More

Related Articles

Back to top button