Aren’t benchtops just adorable little pieces of constructive work? They just bloom up your kitchen set in the most influential style with absolute comfort. In simple words, they are a kitchen asset, and all of us need to get them installed.
Benchtops were principally created to enforce a workflow. Therefore, they should be installed correctly and precisely. So, if you don’t recall any equipment that could work correctly for this task, let us introduce you to concrete pumps.
What are concrete pumps?
Concrete pumps are a revolution in the construction realms. They are an eased out machine that efficiently pours the liquid concrete. In terms of definition,
A concrete pump is an excellent construction tool that transfers freshly mixed fluid concrete to required construction sites. It works on the principle of hydraulic lifts.
The concrete pumps effortlessly cascade out concrete at required sites, thereby easing up physical labor. Concrete pumps have been in the market since the latter half of the 20th century and have been evolving ever since.
Therefore, if you desire to work with it, here is some information you must know. We will list everything you need to know about a concrete pump before getting your hands on it. Here goes the list:
Working of a concrete pump
Working on a concrete pump could be technical. But we promise not to get into the excruciating details. So, here are some notably important working points on the concrete pump.
- A concrete pump is a bilateral, piston structured device.
- One piston is responsible for drawing up the liquid concrete while the other is responsible for dishing it out into the discharge pipes.
- There is a valve between the two pistons that determine which one reaches the discharge pipe and which one opens up to the concrete drawing.
- This valve switches over between the two pistons whenever they work.
Use only pumpable concrete mixes for concrete pumps
There are a variety of concrete mixes available in the market, but only some are suitable for concrete pump uses.
Practically, when we pump concrete, it separates into several layers of water, sand, and cement. To avoid such messed up separations, it is advised to you to use mixes certified for concrete pumps.
A concrete mixer that is qualified for concrete pumps won’t disrupt its concentration when passed through several valves. Neither will it dissolve poorly and come out as a disruptively messy fluid.
Moreover, non-specified concrete mixers can be damaging to concrete pumps. They might clog pump lines and valves or mess up the entire site.
Optimize the pumping operation through precise sizing and measurements
Concrete functions require utter precision and lots of accuracies. You need to calculate proper pressure for pipes in order to maintain a stable flow. Also, the lengths and diameters of pipes should be considered before any application.
The most fundamental factors that affect pipeline pressure are:
- Pumping rates
- Pipe Diameter
- Pipe length
- The horizontal and vertical distance of pipe valves
- Configuration of the entire pump
Which type of concrete pump do you require?
Concrete pumps can be narrowed down to various categories. There can be a variety of products in the market that might confuse you. Therefore, it is recommended to stick to a proper device that is suitable for household purposes only. For any further information regarding the types of concrete pumps, kindly visit: http://www.concretepumpingco.com.au/
The types of concrete pumps include:
- Boom Pumps
- Line pumps
- Separate placing pumps.
The last one, a separate placing pump, is a typical household level pump.